Beier Machinery specialize in providing you with plastic recycling machine for PE,PP,PET,film,plastic granulator,plastic pelletizer.
You are here: Home » News » Introduction of plastic pelletizer
Introduction of plastic pelletizer

Extrusion machine in accordance with the head material flow direction and the screw center line angle, the nose is divided into the angle head (angle 120o) and right angle head. The head of the shell is bolted to the fuselage, the mold within the mold core to sit, and with the nut fixed to the nose into the line port, the core module in front of the core with the core, core and core module The center of the hole for the adoption of the core line; in front of the head with a pressure ring, for equalizing the pressure; squeeze forming part of the set by the mold sleeve and die sets of components, the position of the mold sleeve can be supported by the bolt to adjust , So as to adjust the relative position of the mold sleeve to the core, and to adjust the uniformity of the thickness of the extruded layer. Outside the head equipped with heating devices and temperature measurement device.


Plastic  pelletizer host extruder, which consists of extrusion systems, transmission and heating and cooling system components. Vigorously develop renewable resources, turning waste into treasure.

Category: News

Leave a Reply

Your email address will not be published. Required fields are marked *