Precautions during the use of plastic PVC pelletizer machine?

Precautions during the use of plastic PVC pelletizer machine?

The plastic pelletizer machine is a molding machine that can manufacture materials into specific shapes. Widely used in chemical, petrochemical, pharmaceutical, food, building materials, mining, environmental protection, printing and dyeing, ceramics, rubber, plastics and other fields. The following points need to be noted during use:

1、 Precautions

1. The pelletizer machine should operate in a forward direction; Avoid reversing.

2. The plastic pelletizer machine must not operate on an empty stomach with a cooling machine. It must be operated with a hot machine feeding machine to avoid sticking the shaft.

3. It is strictly prohibited to enter iron objects and other debris in the feed inlet and vent holes of the granulator. To avoid accidents and impact production.

4.Precautions during the use of plastic PVC pelletizer production line

2、 Precautions during the operation of the granulator

1. Always pay attention to changes in the temperature of the body, and when touching the strip with a clean hand without touching it, immediately raise the temperature. Until the strip touches the hand, it’s normal.

2. When the bearing part of the gearbox burns or is accompanied by noise, it should be promptly repaired and refueled.

3. When the bearing parts at both ends of the main engine bearing room are burned or noisy, it is necessary to stop the machine for maintenance and add butter. During normal operation, the bearing chamber is lubricated every 5-6 days.

4. Pay attention to understanding the operating rules of the machine; For example, if the machine temperature is high or low, and the speed is fast or slow, it can be handled in a timely manner according to the situation.

5. When the machine body is unstable in operation, attention should be paid to checking whether the gap between the couplings is too tight and adjusting them in a timely manner.